Product Description

The Eleaf iStick Pico Mega extends the range and versatility of the critically acclaimed iStick Pico, allowing for the use of both 18650 and 26650 battery platforms alongside Eleaf’s newest PCB that features a maximum output of 80W, Smart Mode capability, and a visually streamlined display. The chassis of the Pico Mega is fundamentally grounded in the highly ergonomic iStick Pico, enlarged to allow the platform to use 26650 batteries while still maintaining 18650 compatibility (all batteries sold separately). In 26650 mode, power output tops out at 80W (75W in 18650 mode) with support for Ni200 Nickel, Titanium, Stainless Steel, and three memory TCR temperature controlled output.

The Pico Mega is the second device to integrate the new Smart Mode and, when activated, automatically senses the resistance of the atomizer installed and allows users to set up to 10 output settings which will automatically recognized once the appropriate atomizer resistance has been set. Paired with the Pico Mega is the full size Melo III Sub-Ohm Tank, which features a 4 milliliter top filled tank reservoir and a stealth embedded airflow control system. New to this kit is the introduction of the 0.25 ohm 316L NotchCoil, pairing perfectly with the output ranges of the Pico Mega. Asserting itself squarely at the top of the starter kit market segment, the Eleaf iStick Pico Mega 80W TC Starter Kit by Jay Bo Designs is a thorough upgrade to the original, providing versatility, range, and performance in an affordable set.
 

Please note: This device does not include batteries. Requires one 18650 battery with an output of 20A and above.

We highly recommend using the following batteries:

• Sony VTC5
• Samsung 25R
• LG HG2

 

Recommended E-Liquid for use with this device

This device does not come with E-Liquid. We highly recommend using the following e-liquid brands for the best vaping experience:

• Juicy Joose
• Artistry Extracts
• Flavalab
• Harvest

 

Features:

• Wattage Range: 1W – 80W
• 0.1 to 3.5 ohm Atomizer Resistance Range
• Firmware Upgradeable
• Full Temperature Control Output
• Temperature Range: 200°F – 600°F / 100°C – 315°C
• Firing Modes: VW, Bypass, TC(Ni, Ti, SS), TCR (M1, M2, M3)
• Smart Mode
• Custom Logo Capable
• Compact Form Factor (53.5mm by 31.5mm by 73.5mm)
• Simplified OLED Screen
• Compatible With 18650 & 26650 Batteries (Battery Not Included)
• Three Button Operation
• Spring Loaded 510 Connection
• Micro USB Charge Port

 

Melo III Sub-Ohm Tank Features:

• 22mm Diameter
• 4ml Tank Capacity
• Top Fill System
• Melo III Coil System
• Invisible Airflow Control
• Heat Insulated Drip Tip
• 65mm Height
• 304 Stainless Steel

 

Contents:

• 1 x iStick Pico Mega
• 1 x Melo 3 Atomizer
• 1 x 0.3Ω EC Head (Pre-Installed)
• 1 x 0.5Ω EC Head
• 1 x 0.25Ω EC NC Head
• 1 x Micro USB Cable
• 1 X 18650 Battery Adapter
• 3 x Spare O-Rings
• 2 x User Manuals

 

Replacement Coils for this kit:

iJust 2 Replacement Coils

Without batteries included this item will be sent via express post Australia wide. If batteries are included: Victorian residents will receive Express shipping, shipping time is generally 24-48 hours. Lithium batteries can not be sent via Express Post Airmail. All lithium batteries are classified as dangerous goods and cannot be carried by air. Australia Post cannot accept lithium batteries or devices containing lithium batteries for mailing overseas or for domestic air carriage. Parcels containing these items will now only be transported within Australia and by road which can take 1-10 days.

Due to the nature of these devices and due to our inability to know how the product is used and/or treated we can not refund or replace the item after 14 days so please be aware of this prior to purchase. During that time we will exchange in the event of defect not caused by misuse or user originated damage. We accept no responsibility whatsoever for any damage or injury as a result of incorrect use.